14 – Command Reference
Command Listing
14-138 59263-02 A
S
Show Config Port
Displays configuration parameters for one or more ports.
Authority None
Syntax show config port [port_number]
Keywords [port_number]
The number of the port. Ports are numbered beginning with 0. If you omit
[port_number], all ports are specified.
Examples The following is an example of the Show Config Port command for port 0:
SANbox #> show config port 0
Configuration Name: default
-----------------------------
Port Number: 0
------------
AdminState Offline
LinkSpeed Auto
PortType GL
SymbolicName Port0
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
ExtCredit 0
FANEnabled True
AutoPerfTuning False
LCFEnabled False
MFSEnabled True
VIEnabled False
MSEnabled True
NoClose False
IOStreamGuard Disabled
PDISCPingEnable True
To Next Page
Loading...
