14 – Command Reference
Command Listing
59263-02 A 14-67
A
Reset
Resets the switch configuration parameters. If you omit the keyword, the default is
Reset Switch.
Authority Admin session
Syntax reset
callhome
config [config_name]
factory
ipsec
port [port_list]
radius
security
services
snmp
switch (default)
system
zoning
Keywords callhome
Resets the Call Home database configuration to its default values.
config [config_name]
Resets the configuration given by [config_name] to the factory default values for
switch, port, port threshold alarm, and zoning configuration as described in
Table 14-10 through Table 14-18. If [config_name] does not exist on the switch, a
configuration with that name will be created. If you omit [config_name], the active
configuration is reset. You must activate the configuration for the changes to take
effect.
To Next Page
Loading...
