Qlogic SANbox 5800V Series

14 – Command Reference
Command Listing
14-146 59263-02 A
S
Show Donor
Displays list of current donors and extended credit configuration for all ports.
Authority None
Syntax show donor
Examples The following is an example of the Show Donor command:
SANbox #> show donor
Port Config Ext Credit Max Credit Donated Member of Valid Groups to
Number Type Requested Available to Port Donor Group Extend Credit
------ ------ ---------- ---------- ------- ----------- ---------------
0 GL 0 16 None 0 0
1 GL 0 16 None 0 0
2 GL 0 16 None 0 0
3 GL 0 16 None 0 0
4 GL 0 16 None 0 0
5 GL 0 16 None 0 0
6 GL 0 16 None 0 0
7 GL 0 16 None 0 0
8 GL 0 16 None 0 0
9 GL 0 16 None 0 0
10 GL 0 16 None 0 0
11 GL 0 16 None 0 0
12 GL 0 16 None 0 0
13 GL 0 16 None 0 0
14 GL 0 16 None 0 0
15 GL 0 16 None 0 0
16 GL 0 16 None 0 0
17 GL 0 16 None 0 0
18 GL 0 16 None 0 0
19 GL 0 16 None 0 0
20 G 0 16 None None None
21 G 0 16 None None None
22 G 0 16 None None None
23 G 0 16 None None None
Donor Group Credit Pool
----------- -----------
0 0