Qlogic SANbox 5800V Series - Show Fabric

14 – Command Reference
Command Listing
59263-02 A 14-147
A
Show Fabric
Displays list of each domain, symbolic name, worldwide name, node IP address,
and port IP address in the fabric.
Authority None
Syntax show fabric brief
Keywords brief
Displays a table of switches in the fabric including domain ID, WWN, and symbolic
name. If you omit the Brief keyword, the command displays information for the
local switch only.
Examples The following is an example of the Show Fabric command:
SANbox #> show fabric
Domain *133(0x85)
WWN 10:00:00:c0:dd:0d:53:91
SymbolicName SANbox
HostName <undefined>
EthIPv4Address 10.20.116.133
EthIPv6Address <undefined>
* indicates principal switch
The following is an example of the Show Fabric Brief command:
SANbox #> show fabric brief
Domain WWN SymbolicName
------ --- ------------
*16 (0x10) 10:00:00:c0:dd:00:77:81 swsb1.11
17 (0x11) 10:00:00:c0:dd:00:6a:2d sw12
18 (0x12) 10:00:00:c0:dd:00:c3:04 sw.160
19 (0x13) 10:00:00:c0:dd:00:bc:56 Sb2.108
* indicates principal switch