Qlogic SANbox 5800V Series

14 – Command Reference
Command Listing
59263-02 A 14-213
A
Zoning Active
Displays information for the active zone set or saves the active zone set to the
non-volatile zoning database.
Authority Admin session for the Capture keyword.
Syntax zoning active
capture
Keywords capture
Saves the active zone set to the non-volatile zoning data base.
Examples The following is an example of the Zoning Active command:
SANbox #> zoning active
Active (enforced) ZoneSet Information
ZoneSet Zone ZoneMember
--------------------------------
wwn
wwn_b0241f
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
wwn_23bd31
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:23:bd:31
wwn_221416
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:14:16
wwn_2215c3
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
10:00:00:00:c9:22:15:c3
The following is an example of the Zoning Active Capture command:
SANbox (admin) #> zoning active capture
This command will overwrite the configured zoning database in NVRAM.
Please confirm (y/n): [n] y
The active zoning database has been saved.