4 – Network Configuration
Managing IP Security
4-12 59263-02 A
S
Deleting a Policy
To delete a user-defined policy, enter the Ipsec Policy Delete command as shown
in the following example:
SANbox #> admin start
SANbox (admin) #> ipsec edit
SANbox (admin-ipsec) #> ipsec policy delete policy_1
The security policy will be deleted. Please confirm (y/n): [n] y
SANbox (admin-ipsec) #> ipsec save
The IPsec configuration will be saved and activated.
Please confirm (y/n): [n] y
To Next Page
Loading...
