14 – Command Reference
Command Listing
59263-02 A 14-105
A
Set Pagebreak
Specifies how much information is displayed on the screen at a time. This
command is useful for disabling pagebreaks to allow command scripts to run
without interruption.
Authority None
Syntax pagebreak [state]
Keywords [state]
[state] can be one of the following:
on
Limits the display of information to 20 lines at a time. The page break
function affects the following commands:
Alias (List, Members)
Show (Alarm, Log, Test Log)
Zone (List, Members)
Zoneset (List, Zones)
Zoning (Active, List)
off
Allows continuous display of information without a break. This is the default.
To Next Page
Loading...
