14 – Command Reference
Command Listing
59263-02 A 14-123
A
Set Setup System
Configures the network, logging, NTP server, and timer configurations on the
switch.
Authority Admin session
Syntax set setup system
dns
ipv4
ipv6
logging
ntp
timers
Keywords dns
Prompts you in a line-by-line fashion to change DNS host name configuration
parameters described in Table 14-31. To configure all system parameters, omit
the keyword. For each parameter, enter a new value or press the Enter key to
accept the current value.
Table 14-31. DNS Host Name Configuration Parameters
Parameter Description
DNSClientEnabled Enables (True) or disables (False) the DNS client.
DNSLocalHostname Name of local DNS server
DNSServerDiscovery DNS server boot method: 1 – Static, 2 – DHCP,
3 – DHCP version 6. The default is 1 - Static.
DNSServer1Address
DNSServer2Address
DNSServer3Address
IP addresses (version 4 or 6) of up to three DNS serv-
ers.
DNSSearchListDiscovery DNS search list discovery method:
îš„ Static
îš„ DHCP for IP version 4
îš„ DHCP for IP version 6
DNSSearchList1
DNSSearchList2
DNSSearchList3
DNSSearchList4
DNSSearchList5
A suffix that is appended to unqualified host names to
extend the DNS search. You can specify up to five
searchlists (or suffixes).
To Next Page
Loading...
Need help?
General
