Qlogic SANbox 5800V Series

14 – Command Reference
Command Listing
59263-02 A 14-139
A
The following is an example of the Show Config Port command for an XPAK port:
SANbox #> show config port 20
Configuration Name: default
-------------------
Port Number: 16
------------
AdminState Online
LinkSpeed 10Gb/s
PortType G
SymbolicName 10G-20
DeviceScanEnabled True
ForceOfflineRSCN False
AutoPerfTuning False
LCFEnabled False
MFSEnabled False
MSEnabled True
IOStreamGuard Disabled
VIEnabled False
PDISCPingEnabled True