14 – Command Reference
Command Listing
14-12 59263-02 A
S
The following is an example of the Capture Remove command:
SANbox #> admin start
SANbox (admin) #> callhome edit
SANbox (admin-callhome) #> capture remove
Capture Entries for Profile: Tech_Support_Center
Index TimeOfDay DayOfWeek Interval
----- --------- --------- --------
1 02:00 Sat 1 (weeks)
Please select a capture entry from the list above ('q' to quit): 1
The selected capture entry has been removed from profile Tech_Support_Center.
This configuration must be saved with the 'callhome save' command
before it can take effect, or to discard this configuration
use the 'callhome cancel' command.
To Next Page
Loading...
Need help?
General
