14 – Command Reference
Command Listing
14-62 59263-02 A
S
delete [profile]
Deletes the specified profile given by [profile] from the Call Home database. You
must enter the Callhome Save command afterwards to save your changes.
edit [profile]
Opens an edit session in which to change the configuration of an existing profile
given by [profile]. The Tech_Support_Center profile can be edited. For
descriptions of the profile parameters, refer to Table 14-8. The CaptureEnabled
parameter is displayed only when modifying the Tech_Support_Center profile.
rename [profile_old] [profile_new]
Renames the profile given by [profile_old] to the profile given by [profile_new]. You
must enter the Callhome Save command afterwards to save your changes.
Format Level of detail to be included in the e-mail message:
 ShortText–includes switch and event information.
 FullText–includes switch information, event information, Call
Home contact information, and SNMP contact information.
 Tsc1–includes switch and event information in a format
intended for automated e-mail readers.
MaxSize Maximum number of characters allowed in the e-mail message.
Decreasing this parameter makes for easier reading on small dis-
play devices such as cell phones. The minimum is 650. The max-
imum and default is 100,000.
EmailSubject E-mail subject of up to 64 characters
RecipientMail Recipient e-mail addresses; maximum of 10 addresses. The for-
mat is account@domain.
CaptureEnabled Enables (True) or disables (False) the data capture configuration
only when creating the Tech_Support_Center profile. For more
information about the data capture configuration, refer to the
Capture command.
Table 14-8. Profile Configuration Parameters (Continued)
Parameter Description
To Next Page
Loading...
Need help?
General
