Qlogic SANbox 5800V Series

14 – Command Reference
Command Listing
14-160 59263-02 A
S
Show Ns
Displays the WWNs for devices in the fabric.
Authority None
Syntax show ns [option]
Keywords [option]
The domain IDs or port IDs for which to display name server information. If you
omit [option], name server information for the local domain ID is displayed.
[option] can have the following values:
all
Displays WWNs for all switches and ports.
[domain_id]
Displays WWNs for all devices connected to the switch given by
[domain_id]. [domain_id] is a switch domain ID.
[port_id]
Displays the WWNs for the devices connected to the port given by [port_id].
[port_id] is a port Fibre Channel address.
Examples The following is an example of the Show Ns (local domain) command:
SANbox #> show ns
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 19 (0x13) 1301e1 NL 3 21:00:00:20:37:73:13:69 20:00:00:20:37:73:13:69
2 19 (0x13) 1301e2 NL 3 21:00:00:20:37:73:12:9b 20:00:00:20:37:73:12:9b
3 19 (0x13) 1301e4 NL 3 21:00:00:20:37:73:05:26 20:00:00:20:37:73:05:26
4 19 (0x13) 130d00 N 3 21:01:00:e0:8b:27:a7:bc 20:01:00:e0:8b:27:a7:bc
The following is an example of the Show Ns [domain_ID] command:
SANbox #> show ns 18
Seq Domain Port Port
No ID ID Type COS PortWWN NodeWWN
--- ------ ------ ---- --- ------- -------
1 18 (0x12) 120700 N 3 21:00:00:e0:8b:07:a7:bc 20:00:00:e0:8b:07:a7:bc