Qlogic SANbox 5800V Series

SANbox 5800V Series Stackable Fibre Channel Switch
Command Line Interface Guide
Index-8 59263-02 A
S
Security command 14-77
Activate example 9-9
Active example 9-4
Clear example 9-10
Edit example 9-9
History example 9-6
Limits example 9-6
List example 9-3
Save example 9-9
security database
autosave 9-7
clear 14-77
configuration 9-7
description 9-1
display 14-78
display history 14-78
information 9-2
limits 9-6, 14-78
modification history 9-6
modify 9-9
reset 9-10
restore 9-7
security edit session
cancel 14-77
initiate 14-78
revert changes 14-78
save changes 14-78
security policy
database 4-10
information 4-8
security set
activate 9-11, 14-81
active 9-4
add group 9-11
add member group 14-81
configured 9-2
copy 9-11, 14-82
create 9-10, 14-82
deactivate 9-11, 14-82
delete 9-10, 14-82
delete member group 14-82
description 9-1
display 14-82
display active 14-77, 14-81
display members 14-82
information 9-2
management 9-10
membership 9-5
remove groups 9-11
rename 9-11, 14-82
Securityset command 14-81
Activate example 9-11
Active example 9-4
Add example 9-11
Copy example 9-11
Create example 9-10
Deactivate example 9-11
Delete example 9-10
Group example 9-5
List example 9-2
Remove example 9-11
Rename example 9-11
services
display 5-11, 8-3
managing 5-11
SNMP 13-2
Set Beacon command 5-19
Set Config Port command 14-86
example 6-7
Set Config Security command 14-92
example 9-8
Set Config Security Port command 14-94
example 6-11