Required Equipment
The QQ190™ racing drone requires additional equipment to get in the air. You will
need a control system and a video receiver. There are a myriad of options available,
and the QQ190™ works with most 5.8GHz video receiver systems and radio control
systems on the market.
Required additional equipment:
• 6+ Channel radio control system with 1-wire protocol receiver (SBUS, PPM,
Spektrum Serial 1024 & 2048, Sum H, Sum D. **PWM receiver modules are not
supported**
• 5.8ghz fpv goggles or video monitor with 5.8GHz receiver
• 1300-1600 mAh 4S Lipo batteries with XT-60 connector
• Lipo battery charger
To Next Page
Loading...