BMC FIRMWARE UPDATE
3-93
AMI
This wizard takes you through the process of AMI based firmware upgrade.
To process AMI Firmware Upgrade, select AMI option and click Continue to upgrade the
current device firmware. The screenshot of AMI Firware Update is as shown below.
All configuration items below will be preserved as default during the restore
configuration operation.
The various are listed below.
Preserve All Configurations: To preserve all the listed configurations.
Preserve Configuration Item: The Preserve Configuration items will be listed.
Preserve Status: The status of the Preserve Configuration items.
Enter Preserve Configuration: To redirect to the Preserve Configuration page.
Enter Update Mode: To upgrade the current device firmware.
Please note that after entering the update mode, the widgets, other web
pages and servic-es will not work. All the open widgets will be automatically
closed. If the upgradation is cancelled in the middle of the wizard, the device
will be reset.
To Next Page
Loading...
Need help?
General
