Quatech SDS User’s Manual Installing the device drivers
Uninstalling your SDS
Uninstalling from Windows XP/2000
Follow these steps in the event that you need to uninstall or reinstall
the SDS software on a Windows XP or 2000 system.
1. From the Control Panel, select System.
2. Click on the Hardware tab.
3. Click on Device Manager.
4. Expand Multi-port serial adapters and select your Quatech
Device Server.
5. Right click and select Uninstall.
6. At the Confirmation screen, click OK.
7. Click Finish at the Completing the Add/Remove Hardware
Wizard screen.
Uninstalling from Windows NT4
Follow these steps in the event that you need to uninstall the SDS on
a Windows NT4 system.
1. Click on Quatech Device Manager.
2. Expand the SDS devices and select your Quatech Device Server.
3. Click Remove at the bottom of the screen.
4. If desired, use Add/Remove programs to remove the Device
Manager.
5. Reboot your machine.
July 2005 940-0183-153 Page 29
To Next Page
Loading...
General