Need help?Do you have a question about the Quatech Serial Device Server and is the answer not in the manual?
Describes the two methods for assigning an IP address to the SDS.
Describes the standard connection mode for SDS using virtual COM ports or IntelliSock.
Explains how Tunneling mode creates virtual cable connections between SDS units.
Details Raw TCP mode for simple custom TCP applications without protocol overhead.
Step-by-step guide for unpacking the Quatech SDS and its accessories.
Details connectors, LEDs, power, and reset functions of the SDS hardware.
Details the pinouts and signals for SDS serial ports, including DB-9 connectors.
Provides instructions for physically connecting serial devices to the SDS using serial cables.
Guides users through the Quatech SDS installation wizard, from welcome to preparing for installation.
Details how to change serial port numbers for the SDS in Windows NT.
Guides users on reconfiguring the SDS network settings for its final subnet location.
Details the recommended direct discovery method for connecting and locating the SDS.
Details how to configure TCP/IP and Wi-Fi parameters through the SDS web interface.
Guides users on configuring serial ports for Normal operating mode, suitable for most applications.
Explains how to check the status of individual serial ports on the SDS.
Explains how to manage user access to the SDS for security and control.
Lists common problems, their causes, and solutions for troubleshooting SDS issues.
Details environmental operating conditions, temperature range, and humidity limits for the SDS.
Covers proper handling, cleaning procedures, and service information for the SDS.
Provides physical dimensions of different SDS models.
Details the LAN interface specifications, including speed and connector type.
Describes the serial interface capabilities, including port types and configurations.
Identifies manufacturer, address, and lists conformity standards and directives.
Lists the various product names, model numbers, and years of manufacture for SDS.
Details the five-year limited warranty, exclusions, and procedures for service requests.
To Next Page
General