GL200 Manage Tool User Guide
TRACGL200MT002 - 11 -
“Read From Device”: It is used to read all configuration from device which connects to PC.
“Load Configuration From File”: It is used to load configuration file to the manage tool.
[Send All Configuration]: It is used to execute all configurations in Command Operation Space
except GTRTO.
[Save All Configuration]: It is used to save all configurations in Command Operation Space to
file.
[Connect/Disconnect to COM]: It is used to Connect/Disconnect to COM manually.
2.4.4 Status Bar
There is system status and current status in status bar.
[System Status]: It indicates the count of commands which are waiting and executing to set.
[Current Status]: It indicates current COM status, IMEI, protocol version and software version
which read from device.
2.4.5 Command Browser and Command Operation Space
This area is mainly read and set parameters of device
2.4.5.1 Command Brower
Command Brower separates all @track protocol command to several parts. Click Function in
command Brower, reference parameters of this command will be shown in command operation
space.
Command Brower Function Description Relative Command
Server Connection
Bearer Setting Information GTBSI
Backend Server Register Information GTSRI
Quick Start Settings GTQSS
Device Configuration
Global Configuration GTCFG
Auto-Unlock PIN GTPIN
Software Protocol Watchdog GTDOG
To Next Page
Loading...
