Queclink GL200 - Global Configuration Settings

GL200 Manage Tool User Guide
TRACGL200MT002 - 23 -
3.2.4 Set the parameters of Global Configuration
Step_1: Select “Global Configuration”, after that the parameters of GTCFG show in Command
Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the global parameters. Please refer to “GL200 @Track Air Interface Protocol” for the
meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTCFG to GL200.
Step_1
Step_2
Step_4
Step_3
Step_5
Queclink
Confidential