Queclink GL200 - Set the Parameters of Fixed Report Information

GL200 Manage Tool User Guide
TRACGL200MT002 - 29 -
3.2.11 Set the parameters of Fixed Report Information
Step_1: Select “Fixed Position Report”, after that the parameters of GTFRI show in Command
Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the scheduled report parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.
Step_1
Step_2
Step_4
Step_3
Step_5
Step_4
Queclink
Confidential