Queclink GL200 - Set the Parameters of Quick Start Setting

GL200 Manage Tool User Guide
TRACGL200MT002 - 22 -
3.2.3 Set the parameters of Quick Start Setting
Step_1: Select “Quick Start Settings”, after that the parameters of GTQSS show in Command
Operation Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the GPRS and backend server information parameters. Please refer to “GL200
@Track Air Interface Protocol” for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTQSS to GL200.
Step_1
Step_2
Step_4
Step_3
Step 5
Queclink
Confidential