Queclink GL200 - Speed Alarm Settings

GL200 Manage Tool User Guide
TRACGL200MT002 - 31 -
3.2.13 Set the parameters of Speed Alarm
Step_1: Select “Speed Alarm”, after that the parameters of GTSPD show in Command Operation
Space.
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set the Speed Alarm parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.
Step_5: Click the “Send” button; download the parameters of GTSPD to GL200.
3.2.14 Set the parameters of Digital Output Port Settings
Step_1: Select “Digital Output Port Setting”, after that the parameters of GTOUT show in
Command Operation Space.
Step_1
Step_4
Step_2
Step_3
Step_5
Step_1
Step_3
Step_2
Step_4
Queclink
Confidential