Quectel EP06 Series User Manual

LTE-A Module Series
EP06 Series Hardware Design
EP06_Series_Hardware_Design 2 / 56
About the Document
Revision History
Version
Date
Author
Description
1.0
2018-06-25
Vae LIU/
Wison HE
Initial
1.1
2018-08-07
Vae LIU
Updated the extended temperature range in Table 2 and
27.
1.2
2019-01-31
Ewent LU/
Xavier XIA/
Reed WANG
1. Deleted EP06-APAC and all the related information
and added EP06-CN and the related information.
2. Updated the supported bands and 2×CA
combination of EP06-A in Table 1.
3. Updated the names of pins 8, 10, 12 and 14 of
USIM1 interface.
4. Updated the Reference Circuit of USB 2.0 & 3.0
Interface in Figure 5.
5. Added Chapter 4 GNSS Receiver and updated the
GNSS Performance in Table 14.
6. Updated the description of antenna connectors and
antenna requirements in Chapter 5.
7. Updated EP06-E and EP06-A Conducted RF
Receiving Sensitivity in Chapter 6.4.
8. Updated EP06-E and EP06-A Current Consumption
in Chapter 6.7.
1.3
2020-08-08
Archibald
JIANG
1. Deleted EP06-LA and EP06-CN.
2. Updated the weight and the dimensions in Table 2.
3. Updated the note for GNSS antenna requirements in
Chapter 5.4.
4. Added the GNSS current consumption of EP06-E
and EP06-A in Chapter 6.7.
5. Updated mechanical dimensions of the module in
Chapter 7.1.

Quectel EP06 Series Specifications

General

Brand	Quectel
Model	EP06 Series
Category	Control Unit
Language	English