Quectel EP06 Series - Operating and Storage Temperatures; Electrostatic Discharge

LTE-A Module Series
EP06 Series Hardware Design
EP06_Series_Hardware_Design 42 / 56
1.
1)
SIMO is a smart antenna technology that uses a single antenna at the transmitter side and two
antennas at the receiver side to improve Rx performance.
2.
2)
As per 3GPP specification.
6.5. Operating and Storage Temperatures
Table 26: Operating and Storage Temperatures
1.
1)
Within the operating temperature range, the module meets 3GPP specifications..
2.
2)
Within the extended temperature range, the module remains the ability to establish and maintain a
voice, SMS, data transmission, emergency call, etc. without any unrecoverable malfunction. Radio
spectrum and radio network will not be influenced, while one or more specifications, such as P
out
,
may undergo a reduction in value, exceeding the specified tolerances of 3GPP. When the
temperature returns to the normal operating temperature level, the module meets 3GPP
specifications again.
6.6. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module electrostatic discharge characteristics.
Parameter
Min.
Typ.
Max.
Unit
Operating Temperature Range
1)
-35
+25
+75
ºC
Extended Temperature Range
2)
-40
+85
ºC
Storage temperature Range
-40
+90
ºC
NOTES
NOTES