Quidel Triage MeterPro - Page 34

Page34of86
theproductpackageinsertorcontactQuidelforclarification.Thesevalueswillbeinreversevideoon
thepatientresults.
 Analyteswithacomma–Threerangespossible.Ifthelowernumberis0.0,themetertreatsthe
analyteashavingonlytworanges.If the lowernu mberisnot
0.0,thenormalrangeisanyvalueless
thanthelowernumber.Thefirstabnormalrangeisanyvaluebetweenthetwonumbersandisinclusive
ofthesenumbers.Thesevalueswillbeboxedonpatientresults.Thesecondabnormalrangeisanyvalue
greaterthantheuppernumber.These
valueswillbeinreversevideoonpatientresults.Consultthe
productpackageinsertorcontactQuidelforclarification.

1. Fromthelistofprogrammableparameters,chooseRANGESusingthe

keys.
2. Pressthekey.
3. Selectthetestpaneltypeusingthe

keys.
4. Selecttheanalyte
andlevelusingthe

keys.TheHIGHandLOWvalueforeachoftheanalytes
canbechangedusingthekeypadtotypeinthevalues.Tocorrect,presstocleartheentirenumber.
Thentypeinthecorrectnumber.
5. Pressthekeytosavechanges.

TestSettings
Incertaincases,thelabsupervisormaywishtocontro lwhichtestsareavailable
toberunatthetimeofpatienttesting.Theoptionsare:
1. ACTIVE(ACTIVONSCREEN):
Thetestisalwaysrunandcannotbedeselected.
2. INACTIVE(INACTONSCREEN):
Thetestisneverrunandisnotdisplayed.
3. USERINACTIVE(USRIONSCREEN):
Thetestcanbeselectedbytheuseratthetimeofrunningthetest.
4. USERACTIVE(USRAONSCREEN):
Thetestcanbedeselectedbytheuseratthetimeofrunningthetest

Iftheseoptionsarenotavailableforatest,themeterskipsoverthesettingasthesupervisorscrollsthrough
theoptions.Seepage45formoredetails.

1.
1.
1. 
1.
1.
1. 
1. 
1.
1. 
1. 
1. 
1. 
1. 
1.
1. 
1. Fromthelistofprogrammableparameters,chooseTESTSETTINGSusingthe

keys.
2. Pressthekey.
3. Selectthetestpaneltypeusingthe

keys.
4. Selecttheanalyteusingthe

keys.
5. Select
thedesiredmodeusingthe

keys.
 ACTIVE(ACTI VON
SCREEN)–Thetestwillrunoneverypatientspecimen.
 INACTIVE(INACTONSCREEN)–Thetestwillneverrunonapatientspecimenandisdroppedfrom
alldisplaysandprintouts.
 USERINACTIVE(USRIONSCREEN)
–Atthetimeofpatienttesting,theuserhastheabilitytoselect
thetest.
NOTE: Thefieldwillbedisabledifthepanelsettingisfixed.Consultthespecificpanelpackageinsertto
determineifthesettingmaybechanged.
 MainMenu
 SetParameters