22
Picture 3.12 PTZ Control
2: Cruise between Points
A PTZ camera can be set to cruise between a series of preset points. This is called
acruise.TosetthePTZuptodothisisasfollows:
1). Cruise Between Points Settings
Acruiselineisasetupofmultiplepresetconnectedpoints,thesetupprocedure
isasfollows:
Step 1: InPicture3.10,usetheDirectionkeytoturnthePTZtoadesignated
location,clickthesettingsbuttontoenterPicture3.13,
Step 2: ClicktheTourbutton,enterthetournumberintothePatrolNumber
boxifitisn'talreadyshowingandthenclickAddpreset.Thenumber
ofpresetsinthetourwillshowinthePresetbox.
Step 3: repeatsteps1and2,untilyouhavesetoutallthepresetdesignated
cruise positions
Remove Preset:Pleaseinputthepresetvalueintheblank,clickRemovePreset
button,thenremovethepresetpoints.
Remove Cruise Line:Inputthenumberofcruiseline,clickRemoveCruiseLines
button,thenremovethecruiselinesset.
Picture 3.13 Cruise Between Points Settings
2). To view Cruise between Points
InPicture3.10,clickthePageShiftbuttontoenterthePTZ controlmenuas
shown in Picture 3.12. Please input the patrol number of the cruise in the value
blank,thenclicktheCruisebetweenPointsbutton.ThePTZwillcruisefrompoint
to point on the cruise line. Click the Stop button to stop the cruise.