In X403H403H403HFigure 6-2X, click page switch button, you will seean interface as in X404H404H404HFigure 6-6X.
Here you can activate the following functions:
Preset
Tour(Patrol)
Pattern
Auto scan
Auto pan
Flip
Page Switch
Figure 6-6
6.2.1 Preset Setup
Note: The following setups are usually operated in the X405H405H405HFigure 6-2X, X406H406H406HFigure 6-5X and X407H407H407HFigure 6-6X.
In X408H408H408HFigure 6-2X, use the eight direction arrows to adjust camera to the proper position.
In X409H409H409HFigure 6-5X, click preset button and input preset number. The interface is shown as in X410H410H410HFigure
6-7X.
Add this preset to one patrol number:
Figure 6-7
To Next Page
Loading...
Need help?
General
