The camera shall be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances, etc.
The camera and the DVR should have the same grounding to ensure the
normal operation of the camera.
Guarantee stability and reliability of the transmission line:
Please use high quality, sound shielded BNC. Please select suitable BNC
model according to the transmission distance.
If the distance is too long, you should use twisted pair cable, and you can add
video compensation devices or use optical fiber to ensure video quality.
You should keep the video signal away from the strong electromagnetic
interference, especially the high tension current.
Keep connection lugs in well contact
BTTTB:
The signal line and shielded wire should be fixed firmly and in well connection. Avoid
dry joint, lap welding and oxidation.
BTTTB
3.3.2 Connecting Video Output
Video output includes a BNC (PAL/NTSC 1.0V
P-P
，75Ω）output, a VGA output and
HDMI output. System supports BNC, VGA and HDMI output at the same time.
When you are using a PC-type monitor to replace the monitor, please pay attention to
the following points:
To defer aging, do not allow the pc monitor to run for a long time.
Regular demagnetization will keep device maintain proper status.
Keep it away from devices that produce strong electromagnetic interference.
Using TV as video output device is not a reliable substitution method. You also need
to reduce the working hour and control the interference from power supply and other
devices. The low quality TV may result in device damage.
To Next Page
Loading...
Need help?
General
