Figure 7-3
7.3 LAN Mode
For the LAN mode, after you logged in, you will seethe main window. See Figure 7-9.
This main window can be divided into the following sections.
Section 1: there are five function buttons: Live（chapter 7.4）, setup (chapter 7.8), search
(chapter 7.9), alarm (chapter 7.10), and logout (chapter 7.11).
Section 2: There are channel number and one button: Start all. Start all button is to
enable/disable all-channel real-time monitor. Click it the button becomes yellow. See Figure
7-4.
Figure 7-4
Please refer to Figure 7-5 for main stream and extra stream switch information.
Figure 7-5
To Next Page
Loading...
Need help?
General
