© Copyright Qvis ®. All documentation rights reserved.
7.8 Setup
7.8.1 Channel
7.8.1.1 Conditions
Here you can view device property information. The setups become valid immediately after you
set. See Figure 7-16.
Figure 7-16
Please refer to the following sheet for detailed information:
Please select a channel from the dropdown list.
It divides one day (24 hours) to two periods. You can set
different hue, brightness, and contrast for different periods.
This is to adjust monitor video brightness and darkness level.
The default value is 50.
The bigger the value is, the large the contrast between the
bright and dark section is and vice versa.
This is to adjust monitor window brightness. The default value is
50.
The larger the number is , the bright the video is. When you
input the value here, the bright section and the dark section of
the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright. Please
note the video may become hazy if the value is too high. The
value ranges from 0 to 100.The recommended value ranges
from 40 to 60.
To Next Page
Loading...
Need help?
General
