Qvis Izeus hdcvi dvr User Manual

© Copyright Qvis ®. All documentation rights reserved.
123
7.8.2 Network
7.8.2.1 TCP/IP
The TCP/IP interface is shown as in Figure 7-22.
Figure 7-22
Please refer to the following sheet for detailed information:
Parameter
Function
Mode
There are two modes: static mode and the DHCP mode.
 The IP/submask/gateway are null when you select the
DHCP mode to auto search the IP.
 If you select the static mode, you need to set the
IP/submask/gateway manually.
 If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.
 If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.
 Besides, IP/submask/gateway and DHCP are read-only
when the PPPoE dial is OK.
Mac Address
This is to display host Mac address.
IP Version
This is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Preferred DNS
DNS IP address.

Qvis Izeus hdcvi dvr Specifications

General

Brand	Qvis
Model	Izeus hdcvi dvr
Category	DVR
Language	English