RadioMaster MT12

• To edit the text, using the [roller] or [dial], press the buon, scroll to select the desired leer, then press the
buon again to move to the next space. To toggle between lower and upper case, long-press the buon.
Press the [RTN] buon to exit out of text eding mode.
Image - Image displayed on the main view (only for radios with 212 x 64 displays).
Image dimensions shall be 64 x 32 pixels, 16 bit, grayscale, .bmp le. The image must be stored in the IMAGES folder
of the SD card.
Timers
Timer 1/2/3 - There are 3 congurable mers in EdgeTX. The following conguraon opons will be displayed once
the mer is no longer set to OFF:
Timer 1 [Mode] [Switch]
[Mode]: The opons include:
• OFF- The mer is not used
• ON - The mer runs all the me
• Strt (Start) -The mer starts once the congured switch is acvated. Aer the me is started, the mer
ignores the switch posion.
• THs (Throle) - The mer starts once the throle is raised and the congured switch is acvated. The mer
will stop counng if either the throle posion is lowered back to the minimum value or the congured
switch is deacvated.
• TH% (Throle %) - The mer counts proporonally to the throle. It counts in real-me at full throle and
half speed at 50% throle.
• THt (Throle Start) - The mer starts once the throle is raised and the congured switch is acvated. Aer
starng, the mer ignores the throle posion and will keep counng unless the switch is deacvated.
[Switch]- Select the switch that will trigger the mer to start. If no switch is selected, the mer will trigger based only
on the congured mode. In addion to a switch, you can also select a trim, a telemetry source (triggered when
telemetry data is received from that source), or physical acvity (sck movement or buon press) (labelled as ACT)
Those items with a "!" mark in front of the trigger name mean that the condion is reversed. For example, "!SA-"
means "when SA switch is not in middle/centre posion (= up or down)".
Name: Name of the mer
Start- The me used for the mer's advanced funcons. The default value is 00:00 and when le as such, the mer
operates like a stopwatch, counng upward unl stopped. If a dierent me is entered in this box, then the
addional eld will appear next to the me with the opons: Remain or Elaps.
If set to Remain, the counter will funcon like a countdown mer - counng down from the designated me to zero
and then alerng the user. If set to Elaps, the mer funcons like an alarm, counng up from zero unl the
designated me and then alerng the user.
Persist (Persistence):
• O - The mer value is reset when switching models or when the radio is turned o / on.
• Flight - The mer value is NOT reset when switching models or when the radio is turned o / on. The mer
value is only reset when the Reset ight opon is selected in the Reset menu.
• Manual Reset - The mer value is reset only when it is individually selected to be reset (example: Reset
mer1) in the Reset menu.