Radionics Security System User Manual

11
Turning the System Off
You turn off your security system by entering your personal
passcode. When the system is On, you must enter through a
designated entry door to prevent an instant alarm condition. Opening a
designated door starts entry delay time and the keypad emits a
pulsing “beep” tone to remind you to turn the system off. Enter your
passcode before the delay time expires to turn the system off.
If you enter through the wrong door or fail to turn the system off
before the entry delay time expires, you may cause an alarm. If this
happens, silence the alarm (by entering your personal passcode) and
call your security company to let them know that it is not an emergency
situation.
1. When the system is on, the On light is lit. If the system is All On,
the All light will be lit.
If the system is Part On, the On and Part lights will be lit.
2. Enter your passcode to turn the system off. The keypad emits the
OK tone.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM11

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English