Radionics Security System User Manual

18
Resetting the System
Use this feature to reset the system (including fire points) after an
alarm and to clear alarm memory. Resetting the system takes about
20 seconds. The All, Part, and point lights go out during reset. If points
do not reset, the OK light continues to wink. Call your alarm company
for help.
1. Ensure that your system is off (On light is off).
2. Press the 3 key and enter your passcode to begin the reset.
Resetting takes approximately 20 seconds. During reset, the display
shows the following:
3. After the system is reset, the display returns to normal
operation.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM18

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English