Radionics Security System User Manual

26
Show Passcode Types
I have this feature.
I do not have this feature.
This feature requires a passcode.
Use this feature to find out which passcode type is currently
assigned to each of the users of your system. Passcode types are
shown on lights 1 - 8. User 1 is light 1 and so on. See Change
Passcode Type, page 27, for a description of passcode types.
1. Make sure that the system is turned off.
2. Press the 6 key. The point lights (1 to 8) come on, showing the
current passcode type for users 1 to 8.
3. Light status indicates passcode type:
Flash (fast blink) Owner Type
Wink (slow blink) User Type
On One-Time Type
Off Disabled passcodes and One-Time
passcodes that have been used
once to turn the system off.
4. Press CLEAR to return to the off display.
71-07374-000-B Users Guide.p65 08/21/2001, 1:06 PM26

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English