Radionics Security System User Manual

5
Controlled Points
Controlled points respond to alarm conditions depending upon
whether the system is turned on or turned off . They are programmed to
either respond instantly to alarm conditions or to provide a delay for you
to reach the keypad and turn the system off. Various controlled points
may be located throughout your house. When you turn your system on,
you have the option of turning on all controlled points (All On) or just
some of the controlled points (Part On).
All On
When you turn your system All On, you are turning on all controlled
points, both interior (motion detectors) and exterior (doors and
windows of the building).
Part On
When you turn your system Part On, you are turning on a portion of
the controlled points. The particular points included in this portion are
determined by your alarm company. Part points may include only the
exterior (doors and windows) of your system, or the points on the first
floor of a two-story house. Check with your security company to learn
which points are Part points.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM5

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English