Radionics Security System User Manual

19
Selecting Watch Tone
Your system gives you the ability to “watch” points when it’s turned
off, meaning that it can be programmed to alert you to opened doors
and windows. For example, parents with small children may want a
tone to be sounded whenever a door or window is opened as a way of
monitoring the whereabouts of the kids.
Use this feature to set the type of response your system produces
when a watch point is faulted. For example, you may tell your system to
wink a light and sound a short tone whenever certain doors or windows
are opened. Use the Selecting Watch Points feature to specify which
points in your system are to be “watched.” To select a watch tone:
1. Make sure that the system is off (On light is off).
2. Press the 7 key and enter your passcode. The display shows the
current watch tone selected. In this example, the current watch tone
setting is 1:
3. Select the type of watch tone you want by pressing the indicated
digit:
1 - Wink point light, but sound no tone when points are faulted.
2 - Wink point light and sound a short tone when points are faulted.
3 - Wink point light and sound a tone until the CLEAR key is pressed.
4 - Wink point light and sound a tone until the point is returned to
normal (door or window is closed). Pressing the CLEAR key
will also silence the tone.
4. When you have made your selection, press the CLEAR key to
return to the off display.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM19

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English