Radionics Security System User Manual

13
Turning the System All On, with No Delay
I have this feature.
I do not have this feature.
Use this function to turn on the entire system, both All and Part
without entry or exit delays.
This function is useful when you’re staying home and you want
your system on.
1. Make sure that all points are normal. Press the 9 key twice.
2. If all points are normal, the display shows the following for 3
seconds and the keypad beeps three times. If your system has faulted
points, you should return them to normal, or refer to Bypassing Points.
3. After 3 seconds the system turns on. Notice that the No Delay
light is on.
4. To turn the system off, enter your personal passcode.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM13

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English