Radionics Security System User Manual

15
Turning the System Part On, with No Delay
I have this feature.
I do not have this feature.
Use this function to turn on Part of the system without entry or exit
delays.
1. Make sure that all points are normal. With your system’s display
showing, press the 0 key twice.
2. If all points are normal, the display shows the following for 3
seconds and the keypad beeps three times. If your system has faulted
points, you should return them to normal, or refer to Bypassing Points.
3. After 3 seconds the system turns on.
4. To turn the system off, enter your personal passcode.
71-07374-000-B Users Guide.p65 08/21/2001, 1:05 PM15

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English