Radionics Security System User Manual

28
Change Other Users’ Passcodes
I have this feature.
I do not have this feature.
This feature allows those with Owner type passcodes to change
the passcodes of system users.
1. Press Key 6 to enter Show User Mode.
2. Enter your passcode. (Owner type required.)
3. Press 0.
The Part light begins flashing. You are now in Owner
Passcode Change Mode.
4. Enter the number of the passcode you want to change (1 to 8).
5. Enter a new passcode with the same number of digits as
your passcode.
The OK tone sounds.
If the error tone sounds, go to step 4. Try a different passcode.
6. Enter the new passcode again.
The OK tone sounds. Go to step 4 to change another
passcode or step 7 to continue.
If the error tone sounds, return to step 4. Be sure to enter the
same passcode in steps 5 and 6.
7. After changing a passcode you should check its user type.
Press Clear once to go back to Show User mode.
8. Press Clear a second time to exit the Passcode Change
mode.
71-07374-000-B Users Guide.p65 08/21/2001, 1:06 PM28

Radionics Security System Specifications

General

Brand	Radionics
Model	Security System
Category	Security System
Language	English