RADWAG AS R2 PLUS User Manual

- 27 -
TIME
Option enables printing out the time of the carried out
adjustment.
Header
GLP printout
Footer
VARIABLE 1
Option enables printing out the value of VARIABLE 1.
Header
GLP printout
Footer
VARIABLE 2
Option enables printing out the value of VARIABLE 2.
Header
GLP printout
Footer
NET
Option enables printing out net weight value in a basic unit
(calibration unit).
GLP printout
TARE
Option enables printing out the tare value in the current unit.
GLP printout
GROSS
Option enables printing out the gross mass value in the
current unit.
GLP printout
CURR.RES
Option enables printing out the current measurement result
(NET weight) in a current unit.
GLP printout
CAL.REPORT
Option enables printing out a report from the last adjustment,
according to the settings declared for the adjustment report
printout (see sec. 14.1 of this user manual).
Header
GLP printout
Footer
DASHES
Option enables printing out separating dashes.
Header
Footer
EMPTY LINE
Option enables printing out an empty separating line.
Header
Footer
SIGNATURE
Option enables providing an area for the signature of a user
performing the adjustment.
Footer
PROFILE
Option enables printing out the name of currently selected
Profile.
Header
GLP Printout
Footer
NSTD. PRNT.
Option enables printing out one of 100 non-standard printouts
on the footer printout. The way of entering non-standard
printouts is described further down this user manual.
Header
GLP printout
Footer
For the parameters described above, one of these values must be selected:
NO - do not print
YES - print
Exemplary reports:
Header
GLP printout
Footer

RADWAG AS R2 PLUS Specifications

General

Brand	RADWAG
Model	AS R2 PLUS
Category	Analytical Instruments
Language	English