- 26 -
Option enables naming the project (name associated with a particular type of
weighing). The name may consist of 16 characters maximum.
Option enables printing out the type of the adjustment being carried out.
Option enables printing out the name of a logged-in user.
Option enables printing out the name of the project (see parameter Project).
Option enables printing out the date of the carried out adjustment.
Option enables printing out the time of the carried out adjustment.
Option enables printing out the balance ID number.
Option enables printing out the difference between mass of an adjustment
weight measured during the last adjustment and the current measured mass
Option enables printing out dashes that separate the date of a printout from
a signature.
Option enables providing an area for the signature of a user performing the
adjustment.
For the parameters described above, one of these values must
be selected:
NO - do not print
YES - print
8.2. HEADER, FOOTER, GLP PRINTOUTS
group of parameters enabling to declare data that is to be printed on
a header printout.
group of parameters enabling to declare data that is to be printed on
a measurement result printout
group of parameters enabling to declare data that is to be printed on
a footer printout
Printout variables list:
Option enables printing out the name of a working mode.
Option enables printing out the balance type.
Option enables printing out the balance ID number.
Option enables printing out the name of a logged-in user.
GLP printout
Option enables printing out the name of a currently selected
product.
GLP printout
Option enables printing out the date of the carried out
adjustment.
GLP printout
To Next Page
Loading...
Need help?
General
