- 40 -
• Use the arrow buttons to select the tare which is to be recalled and press button.
• The balance returns to the weighing mode, and the display indicates entered tare value with
a minus „–" sign.
Deleting tare
Entered tare value can be deleted by pressing
button on the overlay or by entering tare value of
0.000g (see description above).
11.2.4. Weighing Profiles
To simplify weighing instrument operation, there are 4 profiles in the software. The profiles are
selected and saved so that the weighings for respective requirements and conditions are optimized.
Profile settings apply to settings for specific working mode and are grouped in the following
parameter: Setup/Working modes/Weighing/Readout.
For detailed description of these settings go to the next section of this user manual.
These are the following profiles:
• User – the basic profile for which filter settings are selected in a way enabling fast and precise
weighing.
• Fast – profile enabling weighing of any mass regardless of the working mode. When running
the balance for the first time, this profile is started automatically. For this profile the
parameters are selected in a way enabling obtaining the measurement result as fast as it is
possible,
• Fast dosing – the profile is dedicated for fast dosing.
• Precision – the profile is dedicated for precise dosing of any mass regardless of the working
mode. For this profile the weighing process takes the most time, but the result is the most
accurate and precise,
Caution: You can modify all settings of User profile. Settings of other profiles (Fast, Fast dosing and
Precision) can be modified only to a limited extend.
Name of currently selected profile is displayed in the bottom line. The profile can be selected
individually for working mode. The balance saves the last used profile in each working mode (with
your modifications) and starts operation with that profile selected.
Procedure:
* In any working mode press F quick access key to which <PROFILE> option is ascribed (for
detailed instruction on how to ascribe quick access keys, refer to F Shortcut keys section of
this user manual) or select <PROFILE> option upon pressing
key.
* Using navigating keys, select profile and press
key.
* The balance returns to weighing mode and operates in accordance with set profile.
To Next Page
Loading...
Need help?
General
