RADWAG AS R2 PLUS - Page 66

- 66 -
In the bottom line message <RESULT> is displayed. It means that the total result of all measured
samples masses is displayed and the sum is automatically printed.
An exemplary printout:
CAUTION: On adding process completion, only a summary is printed.
Masses of particular samples are printed on confirmation.
You can print the sum once again. To do that, press
button. Press button to exit the
window. You return to <ADDING> mode home screen and the data on carried out measurements is
automatically zeroed.
You can print an intermediate sum of saved samples. In such case, follow the steps presented below.
1. Net
Tare
Gross
.
.
.
5. Net
Tare
Gross
38.000g
0.000g
38.000g
5.000g
0.000g
5.000g
- - - - - - - - - - - - - - -
Sum
43.100g
- - - - - - - - - - - - - - -
In order to continue adding process, press button on printing out the sum. Home screen of the
main mode is displayed.
If samples are measured with packagings, load the weighing pan with the packaging, wait for
stabilization and press
button.