RADWAG PS 6000.R2 User Manual

- 111 -
17.6.2. Method of operation to manually start the process
To manually start the process of weighing select the option <AUTOSTART> and
<NO> in the mode settings.
Procedure:
After altering the setting, return to the main window by pressing
button
repeatedly.
Next, set the averaging time in seconds. It is the time, during which the balance
software collects measurements and based on these measurements the average
result is determined.
The parameter <THRESHOLD> is not required for this measurement mode.
Select the mode <ANIMAL WEIGHING>.

RADWAG PS 6000.R2 Specifications

General

Brand	RADWAG
Model	PS 6000.R2
Category	Scales
Language	English