• Select the user that is to be removed from the list
• Press
button
• The software shows <DELETE?> in the bottom line
• Confirm by pressing
button
• When confirmed, the software removes the selected user from the list
• Return to the weighing mode
15.2. Products
PRODUCTS – 1000 different products. The following data can be inserted for each
product: NAME (30 characters), CODE (6 characters), EAN (16 characters), MASS
(with the accuracy of balance reading unit), TARE (mass of the packaging relating
to a particular product with the accuracy of balance reading unit), MIN (low
threshold for the mode WEIGHING>, should be inserted with the accuracy of
balance reading unit), MAX (high threshold for the mode <CHECKWEIGHING>,
should be inserted with the accuracy of balance reading unit), TOLERANCE
(tolerance thresholds to [±] in mode <DOSING> entered as a % of the target mass).
In order to add a product, you should enter in the products database and add the
name of the product (follow the procedure as in the section above).
Next, insert the details about the product.
To Next Page
Loading...
Need help?
General
