F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <PIPETTES CALIBRATION> the following options are
available, which a user can assign to each of the F buttons:
no function assigned to the button
NONE – no function assigned to the button
START – function initiates the option of activation of pipettes calibration
procedure
SELECT PRODUCT – function initiates the option of selecting a product
from product database
LOG IN – function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE – function initiates the option of inserting packaging mass
SELECT TARE – function initiates the option of selecting packaging
mass from product database
PRINT HEADER – function initiates the print-out of a designed header
PRINT FOOTER – function initiates the print-out of a designed footer
VARIABLE 1 – function initiates the selection and editing of variable 1
VARIABLE 2 – function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.
17.8.10. Means of operation
• Enter the mode <PIPET CALIBRATION.>
To Next Page
Loading...
Need help?
General
