17.8.4. Returning to the weighing mode
17.10. Totalising
The function Totalising allows a user to weigh individual ingredients of the
mixture and totalising their total mass. The software enables adding up
approximately 30 ingredients in one mixture.
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <TOTALISING> the following options are available, which a
user can assign to each of the F buttons:
NONE – no function assigned to the button
FINISH – selecting this option finalises totalising of the ingredients within
one procedure; once selected, it prints out the summary and deletes the
data relating to the carried out totalising procedure
DELETE LAST – selecting this option causes subtracting recently added
mass from the total mass of the mixture
SELECT PRODUCT – function initiates the option of selecting a product
from product database
LOG IN – function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE – function initiates the option of inserting packaging mass
SELECT TARE – function initiates the option of selecting packaging
mass from product database
PRINT HEADER – function initiates the print-out of a designed header
To Next Page
Loading...
Need help?
General
