17.9. Statistics
Statistics allows you to collect data of the series of measurements and use
them to generate statistics. The range of statistics data created depends on
the setting of internal functions.
F button shortcuts
The function enables the option of quick access for weighing functions,
which are available when buttons F1, F2, F3 or F4 are pressed.
In the mode <STATISTICS> the following options are available, which a
user can assign to each of the F buttons:
NONE – no function assigned to the button
RESULT – function enables viewing statistics results for the particular
series of measurements
FINISH – selecting this option finishes the series of measurements, once
selected, the statistics for the particular series of measurements is
deleted
SELECT PRODUCT – function initiates the option of selecting a product
from product database
LOG IN – function initiates the option of selecting and logging-in of a
balance’s user
ENTER TARE – function initiates the option of inserting packaging mass
SELECT TARE – function initiates the option of selecting packaging
mass from product database
PRINT HEADER – function initiates the print-out of a designed header
PRINT FOOTER – function initiates the print-out of a designed footer
VARIABLE 1 – function initiates the selection and editing of variable 1
VARIABLE 2 – function initiates the selection and editing of variable 2
The way of declaring the function is described in the section relating to
the weighing mode settings <F button shortcuts>.
To Next Page
Loading...
Need help?
General
