24. ADDITIONAL EQUIPMENT
24.1. Anti-vibration table
It is a very stable basis which eliminates all kinds of vibrations
and ground shakes. The inner part of the table holds a marble
plate, which is a foundation for balance positioning.
24.2. Rack for under hook weighing
The rack is used if under hook weighing option has to be
applied. Under hook weighing is necessary if magnetic loads
are weighed or during density determination of substances.
Racks are also used for measuring absorptiveness os
substances e.g. foamed polystyrene. The rack is made of mild
steel. Rack height is 330mm.
24.3. Density determination kit (for solids and liquids)
It is applicable with balance with resolution at least 1
mg.designed for density determination of solids and liquids.
The procedure is fully automatic, i.e. the user only places
samples on kit’s weighing pans.
24.4. Additional display
Features: Lengh of cable between additional display and
balance – 1,5m, plastic casing, with tilting option.
Number of instruction:
IMMU-03-07-05-14-ENG
To Next Page
Loading...
Need help?
General
